Commercial Water Softeners, UV Water Treatment and Cintropur Water Filters

Cintropur Industrial Range

Cintropur Filter Systems - Industrial Range

Cintropur offers a wide range of Industrial water filters designed for filtering water for a wide range of applications.


All Cintropur Industrial water filters are made of high-quality synthetic materials and offer connection options from 2" BSP to DN80 Flange Connections and yields from 18,000 to over 32,000 litres per hour with very low load losses.


CINTROPUR® offers a double-stage of filtration concept. First, the water flow from the inlet is directly transformed into a centrifugal  spin which  forces the larger particles down into the lower bowl. The next stage of filtration is achieved by the exclusive filter sleeve, available in different micron ratings ranging from 1 to 300µ. 

Considering ecological and economical aspects, there is only a filter sleeve that needs to be replaced every 6 months.


Supplied with a 25 micron filtering sleeve as standard, two pressure gauges and a purging valve as standard issue.


The new industrial range features 3 filters and is capable of handling flow rates from 20 to 30 m³/h.

  • NW 500 : 18 m3/h (2")
  • NW 650 : 25 m3/h (DN65)
  • NW 800 : 32 m3/h (DN80)


ciple 
: Filtering out solid particles (earth, sand, rust, etc,) suspended in the water. Possibility of combining mechanical filter + UV and activated carbon to further improve the treated water quality


Main advantages

    • double stage of filtration (centrifugal flow thanks to the vane + filtering sleeve)
    • low pressure drop
    • high and constant flow rate
    • large choice of filter options, ranging from 1 to 300 microns
    • 100% synthetic filter and high resistance
    • sealing guaranteed thanks to the O-ring system
    • fast and easy rinsing thanks to the drain dump valve
    • long lifetime and uninterrupted spare parts supply
    • Minimal need for maintenance


Two pressure gauges 0-20 bar indicate the system pressure and load loss at all times. Filter sleeves are to be changed at ΔP of 2 bar or at least 3 times a year.

Technical characteristics:

Available Filter Sleeves (sets of 5):
1, 5, 10, 25, 50, 100 micron (also 150 and 300 micron washable nylon)
Maximum temperature: 50 degrees continuous
Maximum usage pressure: 16 bar
Bursting pressure: 30 bar
Initial load loss: ± 0.4 bar depending on types and yields
Average yields for Ð P 0.2 bar (filtering fabric 25 micron):

NW 500: 18 m³/hour
NW 650: 25 m³/hour
NW 800: 32 m³/hour


Call or email us for the best prices and advice on your application. Tel: 0845 10 80 680 / 0044 1403 701970 - sales@gmautoflow.co.uk